BOJACK SPP6 Hard Start Capacitor for Air Conditioning Units 115V-288VAC

The SPP6 Hard Start Air Conditioner Relay or Capacitor Kit is designed for permanent split capacitor single phase air conditioning and heat pump systems. It includes relays and starting capacitors to provide 500% starting torque. This kit is ideal for use in single-phase AC motors, air conditioners, refrigerator compressors, and more. If your new or old compressor won't start, try installing this hard-start capacitor before doing anything else. Starting an air conditioner or heat pump compressor (reciprocating and scroll) requires an extra electrical "shock" to start. Equipment requiring hard-start capacitors includes heat pump or condenser split systems with (TXV) installed, and old heat pumps or condensers that are mechanically stuck and not working.

Installation Notes: - Connect the two wires of the SPP6 in parallel with the run capacitor (one wire on each side) without removing any of the original wires. If all run capacitor terminals are being used, use the SPP6's special "piggyback" terminals. - For 2-wire connection, the hard-start kit is connected in parallel with the run capacitor for Permanently Split Capacitor (PSC) type compressors, and connects to the start and run terminals on the compressor for Capacitor Start Induction Run (CSIR) type compressors. A third connection to the common wire is not required. - Check the model number on the compressor (printed on the nameplate on the side of the compressor) to determine the tonnage of the unit. 6000BTU=0.5 tons, 12000BTU=1 tons, 18000BTU=1.5 tons, and so on.

Package includes: 1 x SPP6 Hard Start Air Conditioner Relay or Capacitor Kit

Additional Information about the SPP6 Kit: - The SPP6 compressor hard start boost capacitor can save compressor aging by increasing compressor starting torque by 500%. - It is available for a variety of air conditioner compressors from 4,000 BTU window units to 120,000 BTU commercial units. - The motor starting capacitor and the PTC thermistor are connected in series, and there are no loose parts and complicated wiring. It only needs to be connected in parallel with the running capacitor. The "piggyback" terminal wiring is adopted, making it easy to install on the running capacitor. - Replacement Part Numbers: TJ90HS6, AP4502872, HS6, HS650, 35702, DST-6, EPP6, HS6, HS650 - It is widely used in air conditioner start capacitor, air conditioner soft start, AC hard start kit, AC capacitor, HVAC capacitor, HVAC hard start kit, etc.

product information: